Personal injury can result from hot, pressurized coolant. Always shut off the engine and allow the radiator to cool before examining the system or beginning any work.
It’s estimated that 40 – 60% of engine failures are coolant related. These failures either are related to using an improper coolant or to topping off the system with the wrong product. Keep careful records to make sure you’re changing the fluid at factory recommended intervals and not mixing coolants.
Check your radiator screen daily during warm weather for dirt, grass, or other debris. A clear screen will help your machine stay cool and ensure maximized performance.
Use compressed air to blow debris from the cores. If material remains, you can use high-pressure water or steam to remove dust and debris, but compressed air is preferred.
When the radiator is cool, slowly remove the radiator cap to reduce system pressure. Inspect the cap for damage or deposits of material. If any cracks or damage are visible, install a new cap. Otherwise, clean and close the cap firmly.
Hydraulic attachments put more stress on a machine’s cooling system than using a bucket. This stress leads to faster overheating and requires the operator to keep a close watch of the machine, especially in hot weather.
"*" indicates required fields